Three-components water-based polyurethane surfacer for aircraft interiors with quick drying.
FR4-45 is intended to correct surface defects such as pin holes on composite and thermoplastic substrates.
Recommended for use in combination with Mapaero water-based topcoat FR2-55, FR6-55, FRC or DI-TEX(see TDS).
Hardener / Catalyst FR4-45
VOC20 g/L or 0.17 lbs/gal (ISO 11890-1) and 40 g/L or 0.33 lbs/gal (ASTM D 3960)
Qualified in accordance with:
Airbus: AIMS 04-08-001, ABS5650 A, CML 16-046, CML-04-BAM6
BMS 10-83 Type IX and Type IV
FMS 5520 class 2
C&D ZODIAC : CDM240-00, CDM240-01
Bombardier : DHMS C4.22
EMBRAER : MEP 10-132, MEP 10-075
Meets the following requirements:
JAR / FAR Part 25 §25.853 (a) + (c / d) / Change 14 / Amdt. 25-83
Product information mentioned in the technical datasheet is given for information purposes and can differ from requirements of specifications above. In that case, customer requirements are valid for your application.
My download selection
Your selection is empty ; please add data sheets to download.